GENESOL30 - BIOCID CHEMICAL

 

GENESOL 30 - MEMBRANE BIOCIDE

 

 

 

Genesol 30 is a fast acting, broad-spectrum biocide used for cleaning Reverse Osmosis and NanoFiltration membranes.It can be used both on and off-line to eliminate microbiological fouling. When used in potable water applications, Genesol 30 should be used ‘off-line’.

 

 

Genesol 30 is also effective in removing biofilm from pumps, tanks and pipe-work. Best results are obtained when Genesol 30 is used at a pH 5.5 – 7.0.

 

 

Residual Genesol 30 can be deactivated to harmless byproducts by using sodium bisulphite.

 

 

Genesol 30 is readily biodegraded in the environment; the degradation rate is enhanced at increasing pH and temperature.
 

 

 

 

 

 

HEALTH AND SAFETY

 

Genesol 30 is based on an organo-bromine compound.

It is corrosive to carbon steel and certain other alloys so all pumps, pipe-work and tanks should be made from acid resistant materials.

A material safety data sheet is available on request.

When using chemicals, comply with regulations on chemical safety and labor protection.

 

TYPICAL PROPERTIES

 

Appearance: pale orange liquid

pH as supplied: 3.5 – 4.5

Specific gravity: 1.24 - 1.26

Freezing point: < - 20°C

Available in 25 kg kegs.

The shelf life of Genesol 30 is 12 months when stored in a cool place.

At ambient temperatures above 20ºC the shelf life of Genesol 30 may be significantly reduced.
 

 

DOWLOAD CATALOG:  Genesol 30